對濟南活動板房的進場材料須驗收把關，嚴禁偷工減料、以次充好的材料進場。材料要按規范和產品質量要求驗收，標準如下：

The incoming materials of prefabricated houses in Jinan must be checked and accepted, and it is strictly forbidden to cut corners on work and substitute inferior materials for high-quality ones. The materials shall be accepted according to the specifications and product quality requirements, and the standards are as follows:

①鋼結構濟南活動板房立桿柱底層所用的方鋼尺寸要求100㎜×100㎜，厚度達到2.5㎜，二層立桿柱所用的方鋼尺寸要求80㎜×80㎜，厚度達到2.5㎜，大梁、次梁用材角鋼須尺寸達到30㎜×30㎜，厚度達到3㎜，鋼材質量要求采用國標鋼材。

① The dimension requirement of square steel for the bottom layer of upright column of steel structure Jinan movable plank house is 100 ㎜ × 100 ㎜, the thickness reaches 2.5 ㎜, and the dimension of square steel used for two-layer upright column is 80 ㎜ × 80 ㎜, thickness up to 2.5 ㎜, angle steel for girder and secondary beam must reach 30 ㎜ × 30 ㎜, the thickness reaches 3 ㎜, and the steel quality is required to adopt the national standard steel.

②進場彩鋼板質量，要符合質保書所要求的質量。

② The quality of mobilized color steel plate shall meet the quality requirements in the warranty.

③搭設活動板房所需電焊條應采用T422，其牌號應符合國標GB981-76要求。

③ T422 electrode shall be used for the erection of movable plank house, and its brand shall meet the requirements of national standard GB981-76.

④進場的大梁在制作中，應按產品要求規范作業，不允許偷工減料，按要求設置好斜角鐵及方鋼立桿。這是活動板房控制的重要部位，必須嚴格把關。

④ During the fabrication of the girders entering the site, the work shall be carried out according to the product requirements. It is not allowed to cut corners. Angle iron and square steel poles shall be set as required. This is an important part of the safety control of prefabricated houses, which must be strictly controlled.

此外活動板房的設計圖紙的使用標準不完全、不準確。如部分設計注明運用了過期的、曾經廢黜的規范；部分材料的等級不全、高強螺栓、一般螺栓和鉚接之間的連接點標記不明白或是未顯現；還有對各類高強螺栓、一般螺栓、栓釘、拉鉚釘和墊圈的規格、型號、功能沒有詳細標志等，這些一系列的問題都會導致活動板房隱患。

In addition, the use standard of design drawings of prefabricated houses is incomplete and inaccurate. For example, some designs indicate the use of outdated and deposed specifications; The grade of some materials is incomplete, and the connection points between high-strength bolts, general bolts and riveting are not clearly marked or not shown; There are also no detailed signs on the specifications, models and functions of various high-strength bolts, general bolts, studs, rivets and washers. These problems will lead to potential safety hazards of prefabricated houses.

活動板房的使用壽命少在15年以上，可以反復使用搬移不需要拆裝，無材料損耗?？闪⒓凑w或部分搬遷到另外一個新的項目，這樣不要重復另外建設，這樣要比反復購買搭建其他。您有需求就來我們網站http://進行咨詢吧！

The service life of movable plank houses shall be at least 15 years, which can be used repeatedly and moved without disassembly and material loss. You can immediately move to another new project in whole or in part, so that you do not need to repeat the construction of another project, which is more than buying and building again and again. Come to our website if you need http:// Consult!